Freight will be accurately calculated at checkout. For a formal PDF quote please contact: 206.788.4210 or email@example.com.
Production on your order begins immediately. Most of our designs are made to order and typically ship in 3 - 10 business days. Orders over 50 panels may require additional lead time. Minimum order is 6 panels.(Orders less than 6 panels may be not be fulfilled) Panels arrive on a pallet. Pallet jack or forklift recommended at receiving end. Commercial Grade, 32" by 32" by 1" Glass Reinforced Gypsum w/lightweight core. Class A, NFPA 286 PASS Steel reinforced joints. Alignment tabs ensure accurate surface alignment.
• PANELS must be screw mounted through the face directly to the substrate, typically drywall. Panels are not attached to studs.
• All panel-to-panel edges are glued with approved adhesive as panels are mounted. The backs are not glued, only the panel edges.
• Seams are filled with the approved spackling compound.
• Seams are sanded.
• Surface is sealed with the approved primer/sealer.
• Desired finish paint is applied. Flat paint is recommended, and spray application provides the best results.
To perform the installation of modularArts panels, we recommend that a finish carpenter or millworker mount and edge-glue the panels, and a drywall tradesperson address the seams.
One man-hour per panel should be allowed to bring the installation to a paint-ready state. Drying time of adhesive is not included. Adhesive requires 24 hours to dry. Experience may certainly shorten labor time!
A detailed Instruction Booklet will come with the panels.
Installation Kit Contents
(for installations up to 50 panels):
• APPROVED DRY MIX JOINT COMPOUND
(must be used with acrylic fortifier listed below)
18 lb bag
• APPROVED ACRYLIC FORTIFIER
• APPROVED CONSTRUCTION ADHESIVE (for bonding panels edges together during install)